Shoe Cleaning Guides
How to Clean Dirty Trainers: A Step-by-Step Guide
Published 23 October 2026 · 6 min read
Whether it's festival mud, winter pavements or a year's worth of everyday wear, most dirty trainers follow the same cleaning sequence. Work through these steps in order — dry before wet, gentle before firm — and you'll get a proper result without risking the shoes. If you're new to this, the golden rule is simple: you can always clean a bit more, but you can't undo damage from going too hard too soon.
First: identify the materials
Before any water or product touches the shoe, work out what you're cleaning. Mesh or knit uppers, smooth leather, synthetic panels and rubber soles each want slightly different treatment, and suede needs a completely dry approach — if your trainers have suede panels, read our suede guide for those sections before continuing. Check the manufacturer's care instructions if they're available.
Step 1: Remove the laces
Laces out, always. It lets you open the shoe up, clean the tongue and eyelet area properly, and stop dirty water from the uppers soaking into clean laces. Drop the laces into a bowl of warm water with a little cleaning solution to soak while you work on the shoes.
Step 2: Remove loose dirt
If the trainers are muddy, let the mud dry first — wet mud smears, dry mud brushes off. Knock the soles together outside, then brush the whole shoe with a soft brush: uppers, tongue, and especially the welt where the upper meets the sole. This step matters more than people think. Every bit of grit you remove now is grit you won't grind into the material later.
Step 3: Clean the uppers
Mix a small amount of suitable cleaning solution with warm water. Dip a soft brush or microfibre cloth in, shake off the excess, and clean in small circular motions, panel by panel. Keep the shoe damp rather than wet — you're lifting dirt off, not giving it a bath. Wipe each panel with a clean, damp cloth as you go to remove loosened dirt and suds. Stubborn spots get a second gentle pass, not a harder first one.
Step 4: Soles and midsoles
Soles can take more effort than uppers. A firmer brush with the same solution handles most of it; a melamine sponge, used lightly, lifts scuffs from smooth rubber midsoles — keep it away from uppers, prints and paint. Brush out the tread on the outsole so nothing is left to walk back onto your floors.
Step 5: Laces and insoles
Back to the soaking laces: rub them between your fingers, rinse in clean water and hang them to air-dry. If the insoles come out, take them out and wipe them with a barely damp cloth, then air-dry them separately — never soak insoles, as they can lose their shape. A dry shoe with a damp insole inside is a shoe that will smell by Friday.
Step 6: Dry safely
Stuff the trainers with plain white paper, replace it if it gets soaked, and leave them at room temperature with airflow, out of direct sun and away from radiators. Expect a full day, sometimes longer. Heat-drying warps glues and can yellow white materials — the drying step is part of the clean, so don't rush it.
Finishing touches
Once everything is bone dry, relace the shoes and consider a protector spray suited to the materials — it makes the next clean dramatically easier. Smooth leather sections may benefit from a little conditioner, as covered in our leather cleaning guide. Then stand back and admire: this is the bit that makes it addictive.
Common mistakes
- Washing trainers in the machine — it stresses glues, deforms the shape and can wreck the drum balance.
- Scrubbing uppers as hard as soles.
- Using bleach or household cleaners, especially on white shoes (they yellow — see our white trainers guide).
- Drying on a radiator or in direct sunlight.
- Cleaning suede or nubuck panels with water and soap.
If the dirt has won — deep-set stains, smells that won't shift, or a pair you don't want to gamble on — a professional deep clean goes further than home kit can. Send us an enquiry with a few photos and we'll tell you what's realistic before you spend a penny.
